SERVICE
FAQ
(1) The use temperature of rubber tracks is generally between -25 and +55 ° C.
(2) Chemicals, oil, salt of sea water will accelerate the aging of the track, and the track should be cleaned after use in such an environment.
(3) The road surface with sharp protrusions (such as steel bars, stones, etc.) will lead to rubber track trauma.
(4) The edge stone of the road, ruts or uneven road surface will cause cracks in the ground side pattern of the track edge, and this crack can continue to be used when the steel cord is not damaged. (5) Gravel and gravel pavement will cause early wear of the rubber surface in contact with the bearing wheel, forming small cracks. In severe cases, water intrusion causes the core iron to fall off and the wire to break.
(1) Prohibit overload walking, overload walking will increase the tension of the rubber track, accelerate the wear of the core iron, and seriously cause the core iron to break and the steel cord to break.
(2) Do not turn sharply during walking. Sharp turning is easy to cause wheel trip damage to the track, and can also cause the guide wheel or anti-trip guide rail to hit the core iron and cause the core iron to fall off.
(3) It is forbidden to climb the steps forcibly, which will cause cracks in the root of the pattern, and break the steel cord in serious cases.
(4) It is prohibited to rub and walk on the edge of the step, otherwise it will interfere with the body after the track edge is rolled away, resulting in scratches and cuts on the track edge.
Rubber tracks are tracks made of rubber and skeleton materials, which are widely used in construction machinery, agricultural machinery and military equipment.
(1) Fast speed
(2) Low noise
(3) Small vibration
(4) High traction
(5) Small damage to the road surface
(6) The ground pressure is small
(7) Light body weight
If you have any questions, please contact us!
